How is the estimates time calculated on these devices? It’s wildly incorrect. For example, I have a 30ah battery, that’s set on the device as 30ah. With a 1A discharge, that should show a estimate time of 30hours, but instead it shows something totally different, perhaps about 1/10th of the correct time remaining. Is there something I’m not understanding about the time remaining shown?
<p style=”text-align: left;”>Hi there, in this case the discharge current is mostly constant. Yet the time remaining is completely wrong (by over 10x).
</p>
In the photo I posted above, what is the 6:29:44 referring to? Remaining time? How is this calculated?
I’m aware and understand that it varies. I’m asking what it signifies. What’s the time? For a 30ah battery that never draws more than 1.5amps maximum, how can the time remaining be so low!?
I think there’s a mistake in the code, because if I were to change the amp hour rating of the battery from 30AH to 300AH, the time remaining will correctly match the current draw. Is there a mistake in the firmware code?
Mmlo
