Home › Forums › Panel Meter Support › Wiring Ammeter Dual
-
AuthorPosts
-
Hello Laurence Pearson,
We are sorry for inconvenience caused on you. Could you please send us a product link or ASIN number? It is hard to cofirm which meter.
Since our product is semi-finished product, factory doesn’t have paper instruction for it. We will try our best to find solution for you.
Best regards.TOM BARIBEAU
May 13, 2019 at 6:01 pmPost count: 0Hello TOM BARIBEAU,
As there are several kind of items above ,we are sorry we can’t confirm which one it is.
Please check if it is this one. #200075, https://www.amazon.com/dp/B01LWMPPSX/ref=as_li_tl?tag=proeng-20
If it is correct, did you use the original CT? Could you please kindly take some images to show the connection?
Best regards.
Kermit Prime
October 25, 2019 at 3:35 pmPost count: 0Kermit Prime
October 26, 2019 at 11:02 amPost count: 0Hello Kermit Prime,
As you mention 0-300V 200A, we think it should be 2001712003
For this item, we are sorry we don’t have longer cable. If you need 2 meter cable, please use shield cable in case influence on measurement.
The connector is XH2.54-3P. It may be not easy to find such shield cable with connector, but you can buy shield cable and connector separately.
Any more questions, please kindly contact us.
Best regards.
David Reichard
February 19, 2020 at 5:38 pmPost count: 0I recently bought two of the “Voltage Current Display, DROK DC 4.5-100V Digital Voltmeter Ammeter Multimeter Panel, 0-50A Volt Tester Meter Amp Detector, LED Voltage Amperage Monitor Gauge for Automotive Motor Battery” from Amazon. So far they seem great. I have two questions:
The wiring diagrams on the back of the meters show the standard wiring with the 50 Amp shunt. But they also show a separate plug in connector for 12 volt power. But it works fine without an extra 12 volt power supply, besides there is no such plug on the display. I suspect that instruction is for other models and does not apply to this one.
When I approach or exceed 50 Amps, I hear a beeping, probably coming from the display. I assume that is an overcurrent warning. It is a nice extra feature but is not documented. Is there any more info available? Like at what current does the beeping start?
Hello David Reichard,
Is it this item? https://www.amazon.com/dp/B07QVXXGVR/ref=as_li_tl?tag=proeng-20
It doesn’t need extra power supply.
Best regards.
Bob
March 17, 2020 at 3:44 pmPost count: 0Hi,
<span class=”order-date-invoice-item”>Ordered on March 16, 2020 <i class=”a-icon a-icon-text-separator”></i></span> <span class=”order-date-invoice-item”>Order# <bdi dir=”ltr”>114-8239578-6816257 From Amazon</bdi></span>
<span class=”order-date-invoice-item”><bdi dir=”ltr”> asin B07RLZ869Q wireless ammeter with shunt</bdi></span>
can you help me with the wiring on the right side of the first wiring diagram?
system is 12 volt dc deep cell battery 100ah for all 12 volt RV use.
Where the diagram shows from + from vin to load, where do I connect this wire for RV load in order to measure amperage and voltage used?
Although diagram shows load connection is on – side, seems like it could only go to the right lug nut from the + battery side.
if there is anyway you could draw a diagram or suggest where to hook up for rv battery monitoring, I would appreciate it.
Also, battery is located external to rv in a plastic case. Does the measuring unit need to be separately enclosed to prevent any water infiltration?
many thanks.
will you be selling this unit again, as it is not very available on Amazon?
Bob
March 21, 2020 at 8:46 pmPost count: 0is this enough information? It’s the 100 volt 100 amp Drok wireless. It’s the smaller one. I put asin in last message.
thank you very much.
https://www.amazon.com/gp/product/B07RLZ869Q/
<h1 id=”title” class=”a-size-large a-spacing-none”><span id=”productTitle” class=”a-size-large”>DROK Digital DC Ammeter Voltmeter Multimeter Wireless 0-100V 0-100A Volt Current Power Meter AH Time Watt Hour Capacity Tester Battery Charge Discharge Monitor Gauge</span></h1>Hello Bob,
Thanks. In our wiring diagram, it doesn’t mean you need to connect load directy to VIN. VIN is connected to power supply postive and to measure votlage. The shunt part can be only connected to the load negative.
For any more questions, please kindly let us know.
Best regards.
Jeff
July 7, 2020 at 1:26 amPost count: 0Hello,
I recently purchased a Model YB4835VA volt/amp meter from Amazon and received it today. I wired it per the diagram on Amazon and it worked very well, so thank you! The load I measured as 240V and 5A. This was great, but I expected to see another decimal place in the Amperage readout – like 5.2. Looking back at the information on Amazon it was clearly stated that it only shows Volts and Amps to one digit, so I should have seen that when I ordered it.
My question is, do you make another similar product that shows Amperage with one decimal place? The one I purchased was rated at 200A but I only only need 20A max. Thank you for any recomendations.
-
AuthorPosts