You are here:>>wiring the dual channel audio frequency divider impedance
wiring the dual channel audio frequency divider impedance 2018-09-26T10:41:37+00:00

Home › Forums › Any Other Products › wiring the dual channel audio frequency divider impedance

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Albert LV
    September 18, 2018 at 4:41 am
    Post count: 0
    #30240 Reply |

    Hello I had purchase through amazon, one 6 ohms tweeter and a dual channel audio frecuency divider, both DROK, in order to enhance a two 12 ohms center speaker wired in parallel (6 ohms to the receiver).

    So my question is, if i wire the frequency divider Bass on parallel (12+12 ohms = 6 ohms) and Tweeter 6 ohms, what is the impedance to the receiver?

    And if the two 12 ohms speakers wired in series with the 6 ohms tweeter, what impedance is on the receiver?

    Thank you very much in advance.

    Albert

     

    Albert LV
    September 23, 2018 at 5:14 am
    Post count: 0
    #30258 Reply |

    2 x 12 ohms in parallel connected in “B” and the 6 ohms tweeter connected in “T” on the frequency divider, gave me 6.5 ohms total output, so mission acomplished! I had manage to improve an old ONKYO center speaker with a 6 ohms Drok tweeter and a dual channel audio frequency divider, also Drok.

    Greetings.

    Albert

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
Reply To: wiring the dual channel audio frequency divider impedance
Your information: