You are here:>>Drok
Drok

Forum Replies Created

Viewing 15 posts - 2,566 through 2,580 (of 2,965 total)
  • Author
    Posts
  • Drok
    Keymaster
    Post count: 2971

    Hello Aaron H,
    Thank you for your interest in our product.
    Here is the recommendation for you:
    DROK® DC-DC Automatic Buck Boost Converter 6V-35V 1-35V 5A Step Down/Step Up Voltage Regulator Adjustable Output Volt 5V 12V Power Supply for Car Auto Vehicle Motor Regulated SR

    Parameters:
    Input voltage: DC 6V to 35V
    Output voltage: DC 1.0V to 35V(please note output voltage can be more/less than input voltage as this is a buck/boost converter)
    Boost Transfer efficiency: about 90%(90% is gained when input 12V and output 19V/2.5A;please note that efficiency is related to input/output voltage and current)
    Buck transfer efficiency: 88%
    Max input current: 7A(please leave margin for long-term working)
    Max output current: 5A(please leave margin for long-term working)
    Dimension: 70*40*31mm

    Hope this can help you.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hi chris,
    Thank you for your advice and understanding.
    We have updated the description of the product.
    Have a nice day!
    Best regards

    Drok
    Keymaster
    Post count: 2971
    in reply to: emails and help #5325

    Hello snehal carneiro,
    Thank you for writing in.
    The 12V 5A 120W DC adapter is suitable for the amplifier.
    And the power supply of 12V 5A would be the best configuration for this product.
    Hope this can help you.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hi Curtis W,
    Thank you for writing in.
    Does the product work now?
    If not, please tell us more details of your operation,such as the input voltage/current, the wiring, the working environment.
    If you can, we sincerely hope that yo can send us some images or video to let us check the problem details.
    Have a nice day!
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hello Kelsyn Rooks,
    Thank you for writing in.
    Here is the Instruction of the product:
    Instruction_200186
    Hope this can help you.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hello chris,
    Thank you for writing in.
    This product does not support 0-5V analog input control: for PLC analog control, Hall handle control.
    So sorry for causing you misundestanding and the inconvenience caused on you.
    Beg your forgiveness and understanding.
    Best regards

    Drok
    Keymaster
    Post count: 2971
    in reply to: emails and help #5308

    Hello snehal carneiro,
    Thank you for writing in.
    Here is the Datasheet of the product:
    DATASHEET_200142
    Hope this can help you.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hello JO 753,
    Thank you for writing in.
    Could you please tell us your order ID or the link of the product?
    It is better that you can tell us more details of how you operate the product, such us the input voltage/current, the wiring, the working environment?
    If you can, we sincerely hope that you can send us some images or video to let us check the problem details.
    With your help, we can find a solution more quickly.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hello Bill,
    Thank you for writing in.
    Could you please tell us your order ID or the link of the product?
    With your help, we can find a solution more quickly.
    Looking forward to hearing from you.
    Best regards

    Drok
    Keymaster
    Post count: 2971
    in reply to: USB Tester #5287

    Hi Scott Ratson,
    Thank you for your cooperation.
    Here is the Instruction of the product.
    Instruction_300043
    Hope this can help you.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hello Maha Achour,
    Thank you for writing in.
    Sorry that we are not sure what is the switch integration?
    Is the switch integration the load?
    Please tell us more details about it.
    With your help, we can find a solution more quickly.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hi Jon,
    If the voltage drops slightly, it is normal.
    If the voltage drops so much, you need to check if the lead wire is to thin.
    The LED indicator is for indicating the charging statue of the device.
    The red color means the the device is charging while the blue color means the device is full charged.
    Hope this can help you.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hello Jon,
    Thank you for your detailed description.
    Does the product work normally now?
    If not, you can sent us an email(service at droking dot com) with some images or video of you wring to let us check the problem details.
    Best regards

    Drok
    Keymaster
    Post count: 2971
    in reply to: USB Tester #5257

    Hi Scott Ratson,
    Thank you for writing in.
    Could you please tell us your order ID or the link of the product so that we can ensure which product you are referring to?
    With your help, we can find a solution more quickly.
    Best regards

    Drok
    Keymaster
    Post count: 2971

    Hi Jon,
    Thank you for writing in.
    This item is a DC to DC buck converter, so both the input and the output are DC voltage.
    Could you please tell us more details of how you operate the product, such as the wiring, the working environment?
    If you can, we sincerely hope that you can send us some images or video to let check the problem details.
    Looking forward to hearing from you.
    Best regards

Viewing 15 posts - 2,566 through 2,580 (of 2,965 total)