Forum Replies Created
-
AuthorPosts
-
in reply to: Product Code: 200273 full spec sheet. #35509
Hello Lantz Jones,
Thanks for writing in.
Here are some information for your reference. Hope it can help you.
https://www.droking.com/cs/wp-content/uploads/2019/02/200273-spec-sheet.pdf

Best regards.
Hello Gary,
This item doesn’t have under voltage setting.
8A is the max output current it can handle. Output current is mainly decided by load.
Unless there is short circuit or other issue, the max output current will not be over 8A.Any more questions, please kindly contact us.
Best regards.Hello dear,
For the wiring:
Red: Power 7-30 v
Black: negative
Green: Signal input pinFor more question, please feel free to contact us.
Have a nice day.
Best regards,
DROK
in reply to: manuals for your product #35473Hello Omkar Bhandakkar,
Thank you for writing in.
Could you please tell us more details of your application, such as the input voltage/current, the load, the wiring?
If you can, we sincerely hope that you can send us some images or testing video to let us check the problem details.
With your help, we can find a solution more quickly.
Best regards
in reply to: manuals for your product #35471Hello Michael,
Thank you for writing in.
The following link is the PDF file of the datasheet of 2001708009, please check it.
https://www.droking.com/cs/wp-content/uploads/2019/02/Datasheet_2001708009.pdf
Hope this can help you.
If there is any problem, please feel free to contact us.
Best regards
in reply to: Pots won't adjust #35469Hello David,
Thank you for writing in and sorry for the inconvenience caused.
Could you please send us the product link or tell us the order ID of the product you purchased?
With your help, we can find a solution more quickly.
Waiting for your reply.
Best regards
Hello Dom Williams,
Thank you for writing in.
Since it is the vacation of Chinese Spring Festival, our technical team is out of office.
We cannot find a solution to you right now.
Please wait until 11th Feb. when our technical team go back to work.
We will give you a reply as soon as possible.
Best regards
Hello Nick,
Thanks for writing in.
YB27VA has several meters with different current measurement range. Could you please let us know which one it is?
Please kindly check below two wiring diagram. Both of them are available. If your meter is with 10A range, you don’t need to connect shunt.
Best regards.


Hello Dennis,
With your email account, we find out one order #3437. It was shipped on January 16.
Tracking number: LT234625451CN (EUB). It is still in transit. Please kindly wait a few more days.
Best regards.
in reply to: Is output pure dc? #35453Hello Tony Curtis,
Output is DC voltage and current. Regarding to current ripple, would you mind waiting some times? As our technicians have been out of office for holiday, we are sorry we can’t keep in touch with them now. Beg for your forgiveness.
Best regards.
Hello Dan,
Thanks for writing in.
The power supply for 200128 is AC 110v. It can’t work with DC 12V. The 12V in wiring diagram is auxiliary output. It is DC12v,30mA max.
Best regards.
in reply to: Time delay relay #35432Hello Matthew,
Besides power supply connected to VCC and GND, could you please tell us if you connect the other power supply for load? The power goes through VCC and GND is for powering on item only, it doesn’t offer power for load.
Best regards
Hello Bruce,
Thanks for writing in.
We are sorry the screen can’t be turned off.
Best regards.
in reply to: How to turn on constant current? #35423Hello David Mcwhorter,
Could you please tell us which item it is?
For most of our converters, current can’t be adjusted directly.
Constant current regulation is for limit output current. For example, when you set output current as 12A, actual output is mainly decided by load, but the max output will not be over 12A.
Best regards.
-
AuthorPosts