You are here:>>Drok
Drok

Forum Replies Created

Viewing 15 posts - 1,246 through 1,260 (of 2,965 total)
  • Author
    Posts
  • Drok
    Keymaster
    Post count: 2971
    in reply to: DC power unit … #35204

    Hello Al Ferrie,

    Thanks for your order.

    Is it this item? 2001801006

    This working votlage can be DC10-25V. Any more questions, please let us know.

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello J T,

    Thanks for your message.

    The meter you bought should this one 200069 or the other specification.

    We are sorry there is no way to pull data from it, because it doesn’t have communication port. Any more questions, please feel free to contact us.

    Best regards.

     

    Drok
    Keymaster
    Post count: 2971

    Hello NBB,

    Thanks for writing in.

    Would you please tell us more details about your operation parameters?For example, input current, output current you set.

    Is the output power you need is 30w? If it is that case, how large is the input power?

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Stevwn Lester,

    Thanks for writing in.

    300462 only show degree of centigrade.  It’s regretted now we don’t have fahrenheit meter .

    Any more questions, please feel free to let us know.

    Best regards.

    Drok
    Keymaster
    Post count: 2971
    in reply to: Custom led driver #35194

    Hello Ed Foster,

    Thanks for writing in.

    We may not have smaller one meet your need.

    You check if this one is suitable https://www.amazon.com/dp/B00KL7I9XC

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Joe Selch,

    Thanks for writing in.

    We are sorry for inconvenience may cause. Here is a wiring for your reference. Hoep it can help you.

    300473

    Drok
    Keymaster
    Post count: 2971

    Hello Chase Phantom,

    Here is the link: https://www.droking.com/cs/wp-content/uploads/2017/07/200220.docx

    Best regards.

    Drok
    Keymaster
    Post count: 2971
    in reply to: SKU: 200310 #35181

    Hello Tim Regan,

    Thanks for writing in.

    There are 10 address bit (0-9) for saving data. Default output address is “0 “, so please save your setting there.

    Plesae refer to “parameter store and recall” part in instructon. 200310

    Any more questions, please let us know.

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Philip Correll,

    Thanks for writing in. Is it 200327?

    To check it carefully, would you please kindly take some images to show the whole operation?  And which jumper pins did you connect?

    Regarding to zero and span potentiometers, the operation is as follown:

    1.When the current input is at minimum (0mA or 4mA), adjust the Zero potentiometer to make the voltage output to be the minimum value (0.0V or others).
    2. When the current input is at maximum (20mA), adjust the Span potentiometer to make the voltage output to be the maximum value (3.3V or 5V or 10V; the output can be as low as 2.5V when the current input is within 4 -20mA).

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello izzy cebreros,

    Thanks for writing in.

    In general, due to time difference, we are sorry we may not be able to call buyer directly. Would you please tell us more details about your problem so that we can find soltuion for you? And here is the instruction 200350

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello David Johnson,

    Thanks for writing in.

    Would you please tell us more details? Do you mean actual output doesn’t match preset value? How large is the output setting and input voltage/current?

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello William,

    Thanks for writing in.

    According to your pictures, it display ℃,Ah, which may not be activated before leaving factory. We are sorry for inconvenience caused on you. Could you please input 24V firstly(without any load)

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello G.Summers,

    Thanks for writing in. Here is the T/S parameters you need. Hope it can help you.

    110030 parameters

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Robert Brighton,

    Thanks for writing in.

    Do you mean this problm comes up after disconnecting power supply for 3 months? Can it display something when you press S1 and S2 simultaneously?

    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Robert,
    Thanks for writing in.
    If the part connected to L+ and L- is the load you need to measure, the wiring is no problem.
    Regarding to the bottom connection, it seems it is not the part of meter’s wiring. We are not sure if it has any relation to the meter.
    Best regards.

Viewing 15 posts - 1,246 through 1,260 (of 2,965 total)