Click Image for Gallery
Ask Question
It is a Power Supply Module/Battery Charger Control Module, Input Voltage: DC 6~36V, ST processing chip, stable performance, high integration and durable. Automatic Power-off function and discharge protection can prolong battery life. Suitable for discharging protection of all kinds of batteries.
Characteristics:- 1.ST processing chip, stable performance, high integration and durable.
- 2.European-style terminals, with European design standards, uses environmental friendly materials to make. Upper and lower bite more firmly and has good power performance.
- 3.Highlight digital tube, highlight digital tube of three-digit, display accuracy is 0.1.
- 4.Automatic Power-off function and discharge protection can prolong battery life.
- Input Voltage: DC 6~36V
- Control Accuracy: 0.1V
- Power Consumption: <1.5W
- Size: 57*42*19 mm (length*width*height)
- Weight: 28g
- VIN+: battery+
- VIN-: battery -
- VOUT+: positive of device/power supply system
- VOUT-: negative of device/power supply system
"+" button: short press to show stopping voltage; Keep pressing to set stopping voltage.
"-" button: short press to show return difference; keep pressing to set return difference.
- Set Stopping Voltage and return difference:
- Keep pressing “+” button for five seconds until stop voltage value flashing, then press “+/-” button to set stop voltage value.
- keep pressing "-" button for five seconds until return difference value flashing, press “+/-” button to set return difference.
- Example: Stopping value is set as 11v and return difference is 0.6v. Output will be turned off when voltage is below 11v. If voltage is higher than 11.6v, output will be turned on automatically.
- Mandatory Input for five seconds:
- Long press on “+” button for three seconds to enter mandatory mode. Five seconds later it will automatically come to normal mode(stop voltage in normal mode is lower than battery voltage and protected lines will be automatically cut off after five seconds of mandatory input)
- When the new battery is initially used, the rated voltage is close to actual value. To determine stop voltage, user can use general voltage calculation method of battery to calculate reasonable discharge voltage value.
- When this module is used on the old battery, the actual voltage value and the rated voltage value differ greatly. User needs to measure stop voltage value in actual use.
- 1.Applicable to all electric two-wheel vehicle or tricycle batteries within the applicable voltage range.
- 2.Suitable for battery discharge protection of cars and new energy vehicles.
- 3.Suitable for solar, wind and other power supply system.
- 4.Suitable for discharging protection of all kinds of batteries.
- 1 x Battery Over Current and Discharge Protection Module
Attributes | |
input voltage | 7~80V |
output current | -- |
output power | -- |
output voltage | -- |
output ways | 1 |