Forum Replies Created
-
AuthorPosts
-
in reply to: DC-DC Buck Converter doesn't lower voltage #21957
Hello Howard Marsh,
Thanks for your reply.
This item #180078 is the same to #180080. The only difference is without shell.
As what we said previously, please try to turn anticlockwise the “ADJ-V” regulator for over 10 turns until output voltage is changed.
Best regards.in reply to: DC-DC Buck Converter doesn't lower voltage #21902Hello Howard Marsh,
Thanks for writing in.
Would you please firstly help to confirm if it is the following item?
180080The factory default output for this item is 20V, so you need to turn anticlockwise the “ADJ-V” regulator for over 10 turns.
Please let us know if it can work.
Best regards.Hello Sam,
When you measure 0-10V voltage, “Vext+” and “Vext-” terminals need to be connect external power supply. The power supply should be DC10-30v.
Best regards.Hello,William Scully
When you use “VIN-” terminal, the wiring is almost the same to the figure 1,which is connect to “VIN+”. The only difference is to change the “VIN+” into “VIN-“.
Best regards.in reply to: DROK LTC1781 Step Up Voltage Regulator #21864Hello John Sutton,
Thanks for your writing in and bring this issue to our attention.
Would you please tell us if you are talking the following item?
090640
Best regards.Hello William Scully,
Thanks for writing in.
Would you please tell us if you are talking the following item?
200193
When the measuring current is below 2A, you can use VIN- terminal. That will be more precise.
Best regards.in reply to: DROK Signal Amplifier AD620 output amperage rating #21817Hello Joe O,
Thanks for writing in.
Would you please help to confirm if it is the following item?
200315
This item is used to amplify microvolt,milivolt.Output current from this item is not fix value,it’s hard to tell you how large the output current is.
Best regards.in reply to: Specification of "DROK Bluetooth Amplifier 50W×2" #21778Hello Dostir,
Thanks for writing in.
Here is a simple instruction for your reference.
300445
Best regards.in reply to: VAC9010H maximum supported current #21776Hello Todd,
What we mention is the meter instead of hall effect sensor.
Best regard.in reply to: 8A 400W Buck, Automatic Turn On? #21752Hello Rich Harris,
Thanks for your reply.
This item has automatically output function, you can find out it from manual.
200220 manual
If you need more helps, please feel free to let us know.
Best regards.in reply to: 8A 400W Buck, Automatic Turn On? #21671Hello Rich Harris,
Thanks for writing in.
It’s hard to confirm the item you mean. Would you please send us the product link or ASIN number for confirmation?
We will reply to you once we confirm it.
Wait for your reply.
Best regards.in reply to: DC 4.5-30VDC 0.00-99.9V 100A with shunt #21603Hello Gilbert D Hall Jr,
Thanks for writing in.
We can\t ensure the item you mean. Would you please help to confirm if it is the following? If not, please kindly send us product and tell us more detials about your problem.
100177
Best regards.in reply to: DROK 4-20mA Signal Generator, DC 12-30V #21601Hello ben,
In order not to give you a wrong respone, would you please firstly tell us which item you are talking about?
Please kindl send us product link or its ASIN number for confirmation.
Best regards.Hello Anne,
Thanks for writing in.
As the attached picture showed, this item only have input termianl and output terminal. It is easy to hook up.

According to your description, 29V solar panel is input power supply, output load is Goal zero.
For more questions, just let us know.
Best regards.in reply to: TA2024B Amplifier board #21596Hello radu,
Thanks for writing in.
Would you please let us know which item you are talking about?
Please tell us the ASIN number or send us the product link.
With your help, we can find solution for you as soon as possible.
Best regards. -
AuthorPosts