You are here:>>Drok
Drok

Forum Replies Created

Viewing 15 posts - 1,801 through 1,815 (of 2,965 total)
  • Author
    Posts
  • Drok
    Keymaster
    Post count: 2971

    Hello Andrew,
    We are sorry we can’t ensure the item you mention without ASIN/part number.
    Would you please let us know which product you are talking about?
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Leon,
    Thanks for your reply.
    If you can, would you please upload video to Youtube and send the link to service#droking dot com ( please replace # with @)? Or you can jsut send video to the email.
    We will wait for your response.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Sam,
    Thanks for your reply.
    If you want to step down voltage from 12v to 5V, the item(091013) you mention previously should be suitable. But it has better use it within 4.5A.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello John Petre,
    Thanks for your reply.
    We are sorry so far we don’t have product can read read pwm current.
    Hope you can understand.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello ALOIS ORF,
    Thank you for writing in.
    Whick item instruction do you need?
    We are sorry we don’t have your email address, How should we send it to you?
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello John Petre,
    Here is a wiring diagram for 100413.
    100143
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello friend,
    Thanks for your writing in.
    For 10A specification(100014),you can refer to following diagarm:
    100413
    For more question, please let us know.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Leon,
    Thank you for your writing in.
    We think the item you are talking is not the same to the last one.
    Would you please tell us the part number or just send us the link?
    To find out problem for you,would you mind telling us more details about your operation and othere parameters?
    If you can, a short video would be more helpful. You can upload it to Youtube and send us the link.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Jay C Reynolds,
    Thank you for writing in.
    Are you talking about this item?
    https://www.amazon.com/DROK-Digital-Automotive-Display-Support/dp/B01MZ8DIOM/ref=sr_1_1?ie=UTF8&qid=1495500621&sr=8-1&keywords=DROK+DC+12V+Digital+Timer+Relay+Board%2C+Automotive+1500W+Relay+Module+with
    Here is an instruction for your reference.
    300456
    For more questions, please feel free to contact us.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Tony Elliot.
    Thank you for writing in.
    We can’t search any item with ASIN B015MWNCUO and B015MX68IM on Amazon.com
    Would you please tell us which Amazon site you mean?
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Lee Buxbaum,
    Thank you for writing in.
    Are you talking about this item?
    https://www.amazon.com/dp/B00BYL9CHG
    Here are two diagrams for your reference.
    http://www.droking.com/wp-content/uploads/2017/05/100016_16.jpg
    Hope this can help you.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Paul Martin,
    Thank you for writing in.
    To give you an accurate answer, Would you please tell us which meter you are mentioning?
    We will find solution for you at that time.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello sachin,
    Thanks for your reply.
    We are sorry for our fault.
    Here is the right instruction.090483
    For more question, please let us know.
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Bill Willetts,
    Thank you for writing in.
    What is your requirement for input/output current.
    If you want to power LED bulb, it should need constant current. Is it right?
    Best regards.

    Drok
    Keymaster
    Post count: 2971

    Hello Fulvio,
    Would you please tell us more details about your operation? For example, the load.
    Do you mean voltage boosting only can works when input voltage is over 9Vdc?
    Have you selected 8-16v input voltage by adjusting the jumper on the back of the PCB?
    With more information, we can find out solution for you as soon as possible.
    Best regards.

Viewing 15 posts - 1,801 through 1,815 (of 2,965 total)