Forum Replies Created
-
AuthorPosts
-
Hello Michael,
Thank you for writing in and we are glad that this product can meet your demand.
Do you mean you want to purchase the product or want to purchase the product pins diagram?
If for the product pins diagram, so sorry that we cannot provide this for you.
Hope you can understand.
Best regardsHello Sal Veltri,
Thank you for writing in.
Since the Bayite meter is not the band of our store, we are not sure the technical characteristic of this product.
Here is the 100A 100V voltage ampere dual display multimeter of our store:
DROK Micro Volt Amp Meter 0-100V/A VA Multimeter Voltage Current Monitor Voltmeter Ammeter Digital 2in1 Blue Red 2-color LED Display Ampere Volt Tester Gauge
parameters:
Operating voltage: DC 4.5 ~ 30V
Measure the voltage: DC 0 ~ 100V
Minimum resolution (V): 0.1V(when >10V)
Minimum resolution (V):0.01V(when <10V)
Measure current: 2A / 5A / 10A / 50A / 100A (> 10A, need external shunt)
Minimum resolution (A): 0.01 A
Operating Current: <20mA
Display: three 0.28 "LED digital tube
Display Color: Red + Red; Red + Blue (Dual Display)
Dimensions: 48 x 29 x 21 mm
Refresh rate: 500 ms / times
Measuring accuracy: 1% (± 1 digit)
Operating temperature: -10 - 65 ℃
Humidity: 10 to 80% (non-condensing)
Working pressure: 80 to 106 kPawiring:
Black line (thin): vacant or buck circuit (module) is negative
Red line (thin): Power Supply +
Black line (thick): COM, common measurement
Red line (thick): PW +, measuring terminal voltage input positive
Yellow line (thick): IN + input + currentPlease note:
The operating voltage must be DC 4.5-30V.
The ammeter can be connected only to the negative of the device.
≤10A, built-in shunt, no need external shunt; > 10A, need external shunt.
When the black thin line free, it is better to use insulating tape around the exposed portion of the wire to prevent short circuits
If only be used as a voltmeter, connect together the yellow and black line.Hope this can help you.
Best regardsin reply to: Which Panel Meter do I need #11155Hello Sal Veltri,
Thank you for writing in and sorry for the inconvenience caused on you.
Could you please tell us your order ID or the link of the product to let us ensure the product you have bought?
We are not very clear the meaning of that “the voltage setting was 90.0 to 06.0, which I changed to 99.9 to 06.5”
Hoe much the input voltage?
If you can, we sincerely hope that you can send us some images or video to let us check the problem details.
You can send this information to us via email (service at droking dot com).
With your help, we can find a solution more quickly.
Best regardsin reply to: Help wiring 12v to 6v step down voltage converter #11154Hello Danny Yanez,
Thank you for writing in.
Do you mean that there is an original voltage limiter with the fuel gage, which can convert 12V to 6V?
So sorry that we are not very clear about your application.
Could you please tell us more details of it?
With your help, we can find a solution more quickly.
Best regardsHello jmenking,
Thank you for writing in.
Since there are many products with similar product titles, it is hard for us to ensure the product.
Could you please tell us your order ID or the link of the product?
With your help, we can find a solution more quickly.
Waiting for your reply.
Best regardsin reply to: DROK mini bluetooth amp – turn off greeting music #11141Hello Timbo,
Thank you for writing in.
So sorry that we cannot shut down the welcoming music and bluetooth messages right now.
But we will reflect this issue to our technicians and try our best to improve it.
Hope you can understand.
Great thanks for bringing this issue to our attention.
Best regardsin reply to: Bluetooth reciever board JCH-8001.v5 power? #11140Hello George,
Thank you for writing in.
Could you please tell us more details of your operation, such as the input voltage/current, the speaker, the wiring, the working environment?
If you can, we sincerely hope that you can send us some images or video to let us check the problem details.
You can send this information to us via email (service at droking dot com).
Looking forward to hearing from you.
Best regardsHello Jacob Collins,
Thank you for writing in and sorry for the inconvenience caused on you.
Could you please tell us your order ID or the link of the product so we can ensure which product you have?
If you can, we sincerely hope that you can send us some images or video to let us check the problem details.
With your help, we can find a solution more quickly.
You can send this information to us via email (service at droking dot com).
Waiting for your reply.
Best regardsin reply to: Same input and output voltage #11115Hello Lance Dauzat,
Thank you for your quick reply.
How much is the the input current in your application?
If the input is 12V, the min. input current is 10A, otherwise, it cannot provide enough power to drive the load.
If the input current is lower than 10A, could you please try to use another power supply with more than 10A to test the module?
If it still cannot work, please feel free to write back to us.
Hope this can help you.
Best regardsin reply to: Data Sheet #11114Hello Nigel Barboza，
Thank you for writing in.
For wiring a USB receptacle, you need to solder it on the board, which is a little complicate.
So it is not recommended to do it.
Here is the datasheet of the product, please check it:
DATASHEET_100001
And here is the product which equipped with the USB receptacle:
DROK Ultra Small Mini DC Power Module DC 3V to 5V 1A USB Battery Converter Step Up Module Charge for MP3/MP4/Phone Samsung Galaxy S3 iPad iPhone 4S 5 6/6 Plus
Hope this can help you.
Best regardsin reply to: Same input and output voltage #11100Hello Lance Dauzat,
Thank you for writing in and so sorry for the inconvenience caused on you.
Could you please tell us your order ID or the link of the product so we can ensure which product you have?
It would be great helpful that you can tell us more details of your application, such as the input voltage/current, the load, the wiring, the working environment.
If you can, we sincerely hope that you can send us some images or video to let us check the problem details.
With your help, we can find a solution more quickly.
Waiting for your reply.
Best regardsin reply to: DC 5-36V On-Off Delay Timer Switch #11068Hello Chris Moody,
Thank you for writing and sorry for the inconvenience caused on you.
Sincerely many product are with similar product title, it is hard for us to ensure which product you have purchased.
Could you please tell us your order ID or the link of the product so we can ensure the product?
With your help, we can find a solution more quickly.
Waiting for your reply.
Best regardsin reply to: Micro digital thermostat XH-W1209 #11041Hello Steve Hanson,
Thank you for writing in.
The temperature is in Celsius.
Here is the using instruction for you:
Instructions for use：
Connect the power supply and equipment, the measuring temperature is displayed, press the “SET” button, press ” + or – ” to set the desired temperature (long press ” + or – ” to quickly increase or decrease), press “SET” to confirm the setting and return, controller automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads,
LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
Digital LED Tubes: “LL” indicates sensor open, “HH” indicates overrange, the relay will be forcibly disconnected; “—” indicates high temperature alarm
Long press the “SET” button to enter the main menu settings, press ” + or – ” to switching between P0-P6,then long press “SET” or 10 seconds without keystrokes to confirm the setting and return.Buttons:
P0 :Cooling / Heating; Range: C/H; Default: C
P1 :Hysteresis Setting; Range:0.1-15; Default: 2
P2 :Highest Setting Limit; Range:110; Default: 110
P3: Lowest setting Limit; Range:-50; Default: -50
P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
P5: Delay Start Time; Range:0-10 Minute; Default: 0
P6: High temperature alarm; Range:0-110; Default: Off
When the Thermostat is power off, long press “- or +”, you can restore the factory settingsHope this can help you.
Best regardsin reply to: Small 5v amp blown #11016Hello Brody Over,
Thank you for writing in and so sorry for the inconvenience caused on you.
Could you please tell us more details of your operation, such as the input voltage/current, the speakers, the wiring, the working environment?
If you can, we sincerely hope that you can send us some images or video to let us check the problem details.
You can send this information to us by email (service at droking dot com).
Looking forward to hearing from you.
Best regardsin reply to: DC Buck Converter #11015Hello Maria,
Thank you for your message.
Could you please tell us your order ID or the link of the product so we can ensure the product you bought?
With your help, we can find a solution more quickly.
Waiting for your reply.
Best regards -
AuthorPosts
