Forum Replies Created
-
AuthorPosts
-
in reply to: I need instructions #6554
Hello Brad,
Thank you for writing in.
Here is the instruction for you:
DATASHEET_091029
Hope this can help you.
Best regardsin reply to: Audio converter #6553Hello Alec,
Thank you for writing in.
Could you please tell us your order ID or the link of the product?
With your help, we can find a solution more quickly.
Looking forward to hearing from you.
Best regardsin reply to: Wiring of Drok digital multimeter AC 80-260 volts #6541Hello William T. Ward,
Thank you for writing in.
Since the voltage output from the inverter of RV is not sine wave voltage, this product cannot be applied to RV, otherwise, the product will be burnt.
This meter is not suitable for your application.
Hope this can help you.
Best regardsin reply to: Drok SKU:180081 #6539Hello Gary Hetrick，
Thank you for writing in.
Have you check if the power supply supplies power normally and the terminals are well connected or not?
Could you please try to move the connecting terminals to see if they are well connected or not?
If the power supply is normal and the terminals are well connected but the product still cannot work, please feel free to write back to us.
Best regardsin reply to: Wiring diagram for 3-wire volt meter #6513Hello chad,
Thank you for writing in.
Could you please send us some images of your wiring to let us check the problem details?
You can send the images by email (service at droking dot com).
With your help, we can find a solution more quickly.
Best regardsin reply to: Load Battery Tester turns off after an hour #6512Hello David Karl,
We are so that this is useful to you.
If you have any questions, please feel free to contact us.
Have a nice day!
Best regardsin reply to: Which Panel Meter do I need #6511Hello William T. Ward,
We are not sure the amp range of your application, so here are some recommendations for you:
20A version (#200139):
DROK® Digital Multimeter DC 6.5-100V 20A Voltage Amperage Power Energy Meter DC Volt Amp Tester Gauge Monitor LCD Digital Display with Blue Backlight Measuring Volts Current with Built-in Shunt
Parameters:
Working Voltage: 6.5 ~ 100VDC
Measuring Range: 6.5 ~ 100VDC
Rated Power: 20A/2000W
Measuring Accuracy: 1.0 gradeTest range and display format:
Power Range: 0~2kW
within 1kW, display 0.0~999.9W;
above 1kW, display 1000~2000W.
Energy Range: 0~9999kWh
within 10KWh, display 0~9999Wh;
above 10kWh, display 10~9999kWh.
Voltage Range: 6.5~100V(display 6.50~99.99V)
Current Range: 0~20A(display 0.00~20.00A)50A version (#200140):
DROK® Small Digital Multimeter DC 6.5-100V 50A Voltage Amperage Power Energy Meter DC Volt Amp Tester Watt Meter Gauge Monitor LCD Digital Display with Blue Backlight with 50A/75mV ShuntParameters:
Working Voltage: 6.5 ~ 100VDC
Measuring Range: 6.5 ~ 100VDC
Rated Power: 50A/5000W
Measuring Accuracy: 1.0 grade
Before using the 50A current shunt, please set the scale to 50A(default 100A):
Step 1: Long press the button, and release it when “Curr” shows on the power area.
Step 2: At this time the current area displays “100 A”, short press the button to choose “100 A” or “50 A”, this meter requires 50A shunt.
Step 3: Long press the button to exit the setting mode or the setting will automatically save and exist if no key operation in 3 seconds.Test range and display format:
Power Range: 0~5kW
within 1kW, display 0.0~999.9W;
above 1kW, display 1000~5000W.
Energy Range: 0~9999kWh
within 10KWh, display 0~9999Wh;
above 10kWh, display 10~9999kWh.
Voltage Range: 6.5~100V (display 6.50~99.99V)
Current Range: 0~50A (display 0.00~50.00A)100A version (#200141):
DROK® Digital Multimeter DC 6.5-100V 100A Voltage Amperage Power Energy Meter DC Volt Amp Tester Watt Meter LCD Digital Display with Blue Backlight Measuring Volts Current with 100A/75mV ShuntParameters:
Working Voltage: 6.5 ~ 100VDC
Measuring Range: 6.5 ~ 100VDC
Rated Power: 100A/10000W
Measuring Accuracy: 1.0 gradeTest range and display format:
Power Range: 0~10kW
within 1kW, display 0.0~999.9W;
above 1kW, display 1000~9999W.
Energy Range: 0~9999kWh
within 10KWh, display 0~9999Wh;
above 10kWh, display 10~9999kWh.
Voltage Range: 6.5~100V (display 6.50~99.99V)
Current Range: 0~100A (display 0.00~99.99A)Hope this can help you.
Best regardsin reply to: Maximum Wire Length – B015PRF041 #6508Hello JT，
Thank you for writing in.
So sorry that we cannot find out the product which can match with the ASIN: B015PRF041.
Could you please check the ASIN again or send us the link of the product?
With your help, we can find a solution more quickly.
Best regardsHello Michael,
Thank you for your reply and valuable suggestions.
We are so glad that your problem is solved.
If you have any questions, please feel free to contact us.
Have a nice day!
Best regardsin reply to: Can ammeter be used on positive charge wire #6470Hello,
No, it can’t.
The shunt should be connected to the negative side.
Here is the wiring diagram for you:
Hope this can help you.
Best regardsin reply to: No or inaccurate reading #6468Hello Noah Schultz,
Thank you for writing in.
Could you please tell us your order ID or the link of the product?
It is better that you can tell us more details of your operation, such as the input voltage/current, the load, the wiring, the working environment?
If you can, we sincerely hope that you can sent us some images of your wiring to let us check the problem details.
With your help, we can find a solution more quiacly.
Best regardsin reply to: Load Battery Tester turns off after an hour #6467Hello Erick,
There is a setting time shutdown function of this product to product the discharged device to avoid from being over-discharged.
This problem may be caused by it.
Could you please try to set value again?
Here is the instruction for you:
For Setting Timing Shutdown
Quintuple pressing in the homepage for get into the timing shutdown interface with the mark “off” on the screen flickering. At this present, double pressing to increase or single pressing to decrease. Short pressing turns the “off” to 24:00, to23:00, to 22:00, till to 1:00, finally to “off”
After setting completed, till the “Beep” sounds and flickering stops, the new timing shutdown setting would be saved. When there is current flowing next time, it would start count-down and end when the count-down shows zero, thus there is “ Beep” sound and the output would be cut off for safe protectionHope this can help you.
Best regardsHello GAry,
Thank you for writing in.
Since so many product with similar titles, it is hard for us to find out the product you purchased.
Could you please tell us your order ID so that we can ensure the product and find a solution more quickly?
Beg your understanding.
Best regardsHello Nick,
Thank you for your sharing and we are so glad that the product can meet your demand.
The output current range of this product is 0-15A. 10A is for a long-term work in the condition of natural cooling.
“Long-term work” actually means the most suitable current value of this product in such a condition which will not cause the product generate so much heat,even burn the chip.
It is not recommended that the output current is over 12A.
If the output current is over 10A, please add a fan to dissipate heat.
Hope this can help you.
Best regardsin reply to: Drok Model 180040 (Amazon B00sy37s00) #6403Hello Wayne Jordan,
Thank you for writing in.
Here the PDF file is the datasheet of the product:
DATASHEET_180040
Hope this can help you.
Best regards -
AuthorPosts
