Click Image for Gallery
- AC Voltage input: AC 85~264V
- DC Voltage input: DC 110~370V
- Frequency range: 47~63Hz
- Input current: 0.5/115VAC, 0.25/230VDC
- Surge current: cold start 10A/230V AC
- Efficiency: 68
- Standby power consumption: ≤100mW/220VAC
- Output voltage: DC 3.3V
- Output voltage accuracy:±1%
- Rated current: 3A
- Rated power: 10W
- Ripple and noise(rated input voltage):≤100mV
- Linear adjustment rate（at full load）: ±1%
- Load adjustment rate: ±3%
- Start and rise time(at full load): 2000ms, 30ms/115VAC 1000ms,30ms/230VAC
- Hold time(at full load): 16ms/115VAC 50ms/230VAC
- Overload protection (rated input voltage): 115%~150% of rated output power, protection mode: hiccup mode, it will automatically recover when the load gets normal again.
- Short-circuit protection (rated input voltage): can be in short-circuit for a long time and will recover automatically
- Over current protection (rated input voltage) : ≥1.1 times Io
- Start-up delay time (Vin:230VAC): 500ms
- Power-down hold time (Vin:230VAC) : 20ms
- Working temperature: -30~70°c
- Working humidity: 20-90%, no condensation
- Temperature drift coefficient: ±0.02%/°c
- 1. There are pins at the input and output side, you can connect it to you appliance by soldering.
- 2. Universally accepted input voltage: AC85~264V or DC 110~370V
- 3. Lower power consumption, lower ripple, high reliability
- 4. High isolation between input and output, primary insulated and withstand voltage 3KV
- 5. It has over current protection, short-circuit protection and temperature protection.
- 6. Industrial grade, super compact size and meet CE safe design standard.
- 1 x Switching Power Supply