Forum Replies Created
-
AuthorPosts
-
in reply to: Clock malfunction #37336
Hello Steve Reyland,
Is it this item? #200314, https://www.amazon.com/dp/B072QTWNGX/ref=as_li_tl?tag=proeng-20
Could you please tell us how did you program it? For example, which working mode it is, time setting.
Best regards.
in reply to: SIN9020S Get Battery Level Reading Accurate How? #37335Hello Tom,
Only the other version with relay can turn off output. This item is not with relay, so all of protection functions, like OVP, is not available.
And please kindly check your connection, that decide the direction of current. When the arrow near “OUT” points to left, it means current is inputing. AH value will increase.
If arrow points to right, that means current is outputing. AH value will decrease.
Best regards.
Hello Joe,
Our meters can only work for single-phase circuit, which is with one hot wire and netural wire.
We are sorry it is not suitable for your application.
Best regards.
in reply to: SIN9020S Get Battery Level Reading Accurate How? #37324Hello Tom,
It can’t deal with current over 20A. For OAH setting, you can program it base on actual battery capacity.
Here is similar item, https://www.amazon.com/dp/B07YWVCBRN/ref=as_li_tl?tag=proeng-20
Best regards.
in reply to: MPT-7210A mppt charge controller input ratings #37322Hello Bobby,
Are you talking about 200322? Max output current is 10A. It can’t output 15A.
Best regards.
Hello Joe,
Here are some items for your reference.
https://www.amazon.com/gp/product/B01MRZAFAF?th=1
https://www.amazon.com/dp/B07JC6X1JH/ref=as_li_tl?tag=proeng-20
https://www.amazon.com/dp/B014W3D1OC/ref=as_li_tl?tag=proeng-20
Best regards.
in reply to: wire guage and hookup #37314Hello Maureen,
Battery is as power supply and inverter is load, is it right? You can hook it up as per our wiring diagram.
And please choose wire gauge according to actual load current.
Best regards.
Hello Peter M. Brenner III,
We can’t confirm exactly which item it is, please check if it is 2001712003
For this item, please use shield cable , or it will affect measurement. Length can be up to 100 inches.
We are sorry we don’t have longer cables.
Best regards.
Hello Joe,
Our AC meters work for single-phase circuit. Is it suitable for your case? And could you please tell us your measureing range?
Best regards.
in reply to: DC-DC boost Converter #37311Hello Tim Reichhart,
There are many boost converter can meet your requirements.
You can look through Amazon store or our website.
Here are two items for your reference.
https://www.amazon.com/dp/B076TTBKFG/ref=as_li_tl?tag=proeng-20
https://www.amazon.com/dp/B01GFVI6R6/ref=as_li_tl?tag=proeng-20
Best regards.
Hello Tom,
It can’t deal with 30 amps current, that will cause damage.
Best regards.
in reply to: Manual for SKU 200325 #37301Hello THOMAS TOTH,
We have uploaded pdf instruction to Amazon product page, https://images-na.ssl-images-amazon.com/images/I/C1cp04xLq5S.pdf
Best regards.
Hello Joe,
No matter what kind of load you need to measure, wiring method is the same. Please refer to below wiring digram.
best regards.
in reply to: automatic output voltage on 200310_OZ #37297Hello Chiara,
Please refer to section 6 and 8 in this instruction,https://images-na.ssl-images-amazon.com/images/I/B1PU4fR9DiS.pdf
Best regards.
in reply to: Relay connection problem vac9010h #37295Hello Roaman,
Thanks for writing in.
Do you mean relay can’t cut off output? Did you check how much is the input current?
And would you like to show us how it is by video? For example, connection. In that way, we can check check it more quickly.
You can share video link or send video attachment to service@droking.com
Wait for your reply sincerely.
Best regards.
-
AuthorPosts