Click Image for Gallery
- It is a multifunctional converter with 3 working modes: PER mode, VAH mode and PWM mode.
- PER mode: can be used as a cc cv digital control buck boost power supply.
- VAH mode: measure voltage, current, capacity, energy, time, power, temp, used for battery charge and discharge testing.
- PWM mode: output PWM signal.
- Input Voltage Range: DC 3.5-15V
- Output Voltage Range: DC 0.60-30.00V
- Output Current Range: 0.000A-2.000A
- Max Output Power: 15W
PER Mode Protection
- Output short-circuit protection
- Output anti-backflow protection
- Over voltage protection OVP
- Over current protection OCP
- Over power protection OPP
- Over temperature protection OTP
- Input low voltage protection LVP
- Power supply chip protection OEP
- PER Mode --- used as a USB buck boost converter with constant voltage and current function, input voltage range DC 3.5-15V, output voltage range DC 0.60-30.00V, output current range 0.000A-2.000A, max output power 15W.
- VAH Mode --- used as a multimeter to measure and display voltage, current, power, capacity, energy, time and temp, detect fast charge protocol. Input voltage range DC 3.0-15V, volt measurement range DC 0.00-50.00V, amp measurement range 0.00-3.000A.
- PWM Mode --- output PWM signal, adjustable frequency, duty ratio, amplitude.
- Support Fast Charging Protocol --- QC 2.0, QC 3.0, Huawei FCP/SCP, Samsung AFC.
- Temperature --- can be switched between Fahrenheit and Celsius.
1x USB Converter Board