Input voltage range: DC 9~16V Input power: 600W Conversion efficiency: can up to 90% Input current: 600W/13.8V=43.5A Output voltage: main: adjustable ±（22V~35V）; auxiliary: ±15V, unstable Output power: total power 520W Output current: main: 8A*2; auxiliary: max 1.5A (can b..
Introduction:DPX6005 power supply is a full CNC programmable buck converter, small in size, high power, high efficiency and stable operation; 1.8-inch TFT color liquid crystal display, display data is comprehensive and clear; The module is controlled by an advanced microprocessor, which can accurate..
1. Power supply voltage: 6V~36V
(voltage is too low, large load current easily lead to damage to the
module, so the circuit board labeled 9-36V.)The power must not be
reversed or more than 37V, or may burn the module, it is recommended
that the power Input in series 20A fuse. ..
Product Parameters:Input Voltage: 6.5-36 V (If the input voltage is lower than 6.5, current accuracy will not be accurate; LCD display panel will not show anything if it is lower than 5.5 V)Output Voltage: 1.2-32VOutput Current: 4.2-4.5AOutput Power: 50W (natural heat dissipation, within 3.5A)..
ParametersSupport agreement: QC3.0 QC2.0Input voltage: 8V-30VOutput: 100W (max output of single USB is 25W, current can’t be higher than 3.46A when the output voltage is 5V.)Efficiency: 95% (max)Dimension: L90mm*W80mm*H28mmWeight:170gOperating temperature: -40℃-+85℃Application: mobile power bank, ph..
Parameter:1. Working voltage: DC 6-30V2. Trigger signal source: high level trigger (3.0~24v), low level trigger (0.0~0.2V), switching value control (passive switch).3. Output capacity: can control devices within DC 30V 10A or within AC 220V 5A.4. Timing range: 0.01s~9999mins5. Working current: 50mA6..
Input Voltage: 3.5~12V Output Voltage: 1.2~24V
use within 2W when output 1.2~2V voltage use within 3W when output 2~20V voltage use within 2.5W when output 20~24V voltage output power = output voltage x output current Note: This boost converter is not a high-..
Parameter:Model: XY-PWM1Working voltage: DC 3.3V-30VFrequency range: normal mode 1Hz-150kHz; accurate mode 1Hz-15kHzFrequency accuracy: 2% in each rangeSignal load capacity: output current about 5-30mAOutput amplitude: PWM amplitude equals to input voltage valueWorking temperature: -20℃~+70℃Duty cyc..
This is a DC-DC Power Supply Converter Buck Module, voltage range 15-35V to 12V, output power 36W, conversion efficiency more than 90%, to hair the calorie very low, it has short circuit, overcurrent protection.
Module Properties: non-isolated buck module (BUCK)