Forum Replies Created
-
AuthorPosts
-
in reply to: Broken Connector on Stereo Amplifier #7613
Hello Austin,
Thank you for writing in.
We have tested our products before shipping to Amazon warehouse.
This problem may be caused by the shock during delivery.
So sorry for the trouble caused on you and all we want to do is to try our best to find a solution to you.
Could you please tell us your order ID so that we can contact you via Amazon?
Beg your forgiveness.
Waiting for your reply.
Best regardsHello Zach Snyder,
Thank you for writing in.
As your description, it is recommended that you can add a 7A fuse on the input for the converter.
Hope this can help you.
Best regardsin reply to: description explanation #7502Hello Muhammad,
Sorry for misunderstanding your meaning.
Yes, it is right.
Best regardsHello Bill B,
Thank you for writing in.
There is not a part can allows the functions to be available to external switches.
And the hole for installing a push button in the center of the panel below glass window is used to turn on/off the backlight of the panel.
You can solder the button to the points which is marked by yellow frame in the following image:
Hope this can help you.
Best regardsin reply to: DROK TDA 2×10 W amp questions #7476Hello Carsten,
Thank you for sharing your using experience.
It will be great helpful for all the DIY lover.
If there is any questions, please feel free to write back to us.
Have a nice day!
Best regardsin reply to: YB27VA (DC 0-100V / 100A) – Wiring diagram #7475Hello LT4,
Thank you for writing in.
Here are some images that we think it is useful to you:
Hope this can help you.
Best regardsin reply to: description explanation #7471Hello,
You’re welcome.
When you calibrate the current/voltage, it is recommended that the measured value is half of the measuring range, which can reduce error.
The measured value is the value of the load (device) which need to be measured, but not the value of the power supply for the meter.
Hope this can help you.
Best regardsin reply to: DORK AC 100-300v 100a no read outs #7470Hello Rob,
Thank you for writing in.
Could you please tell us your order ID or the link of the product so that we can ensure which product you are referring to?
Waiting for your reply.
Best regardsin reply to: strange readdings #7469Hello david oriordan,
Thank you for writing in.
Could you please tell us your order ID or the link of the product so that we can ensure which product you are referring to?
Waiting for your reply.
Best regardsin reply to: How to calibrate ameter? #7468Hello Mark,
Thank you for writing in.
There is calibration potentiometers with the product.
Here is an image that we think it is useful to you:
Hope this can help you.
Best regardsin reply to: Step-down Burnout? 482422 #7465Hello John Kessler,
Thank you for writing in.
Could you please tell us your order ID or the link of the product so that we can ensure which product you are referring to?
With your help, we can find a solution more quickly.
Best regardsin reply to: Wiring diagram for 3-wire volt meter #7255Hello Chad,
You’re welcome.
So sorry that this meter do not have voltage calibration potentiometer.
However, it is well-calibrated and we have tested our products before shipping to Amazon warehouse.
Hope you can understand.
Best regardsin reply to: description explanation #7251Hello Muhammad,
Thank you for writing in.
When you calibrate the current/voltage, it is recommended that the measured value is half of the measuring range, which can reduce error.
Hope this can help you.
Best regardsin reply to: Solar to Brushless Pump Regulator #7247Hello David Murray,
You’re welcome.
If there is any questions, please feel free to contact us.
Have a nice day!
Best regards -
AuthorPosts