Click Image for Gallery
Ask Question
It is a DC 8-12.6V to 10-14V Step Up Converter,output current 1.8A,Conversion efficiency up to 93%,Applies to 3pcs Lithium batteries to replace 10pcs Ni-MH batteries
Features:
- Module Properties: non-isolated step up module
- PCB size:50 x 18mm
- Input voltage:8-12.6V (3pcs Lithium Battery voltage)
- Output voltage:10-14V (10pcs Ni-MH battery voltage)
- Output Current:1.8A
- Output Power:25W (Max.)
- Conversion efficiency: up to 93%
- Load Regulation: ±1%
- Full load temperature rise: 40 °c
- Operating temperature: Industrial grade (-40°c to 85°c) (ambient temperature exceeds 40°c, please reduce power, or enhance heat dissipation)
- Undervoltage protection: None
- Short-circuit protection: None (If need please install fuses at input port)
- Input reverse polarity protection: None (If need please install diode at input port)
- Boot mode: Power-on
- Close: EN pin is connected to 0V level (output voltage is approximately equal to input voltage)
- Installation: welding
- IN+: input positive
- IN-: input negative
- OUT+:output positive
- OUT-: output negative
- 3pcs Lithium batteries to replace 10pcs Ni-MH batteries
- 1x DC Boost Converter
Attributes | |
input voltage | 8~12.6V |
output current | 1.8A |
output power | 25W |
output voltage | 10~14V |
output ways | 1 |