Multiple USB MONITOR It can measure voltagetag , amperage, capacitance, power going to your phone/battery pack. One button operation, simple and handy.
DUAL COLOR LED Red and Blue color dual LED display, which is bright and easy to monitor the charge voltage and current of your digital USB devices to ensure the optimal charge rate.
DUAL USB OUTPUT There are two USB output which can be used simultaneously. Output USB C can be used for device charging and data transfer, while output usb A is only for charging device.
MULTIFUNCTION It can be used for capacitance checking, capacitance clear, over voltage and under voltage alarm, over-current, and short circuit alarm, easily test the power/quality of the chargers and USB cables.
✓ Input voltage : DC 3.20 - 15.0V
✓ Resolution: 0.01V (<10V); 0.1V (>/=10V)
✓ Measuring current: DC 0.00 -3.00A
✓ Resolution: 0.01A
✓ Capacitance measurement: 0-99999 mA/H
✓ Capacitance accumulation: YES
✓ Power testing: 0.00-9.99-99.9W
✓ Over-voltage alarm: When voltage >/=5.6V, voltage digital point will flash quickly
✓ Lacking-voltage alarm
✓ Over-current alarm : When current >/=3A, current digital point will flash quickly
✓ Short-circuit alarm: current digital point will flash quickly
✓Dual Input ports: Type C+Type A
Dual USB Output
OUTPUT USB C (Dual Function - Charging and Data Transfer)
✓ Data transfer, PD and other charging standards.
✓ The charging current, in this case, is determined by compatibility.
OUTPUT USB-A (Charging Only)
✓ The Built-in intelligent charging control IC offer the most appropriate and safest current for your devices automatically. It is used mainly for Non-original Chargers, but it is suitable for Original Chargers as well.
✓ It is suitable for most of the mobile phones, mobile power, tablet PCs and other USB devices, like BC1.2, YT/D1591-2009 and non-BC1.2 (including iPad, iPhone and Samsung Galaxy).