Parameters:

• Input voltage: AC 85~264V, DC 110~370V
• Input current: 1A/115V AC, 0.5A/230VAC
• Frequency range: 47~63Hz
• Inrush current: Cold boot 15A/230VAC
• Efficiency (TYP.): 83
• Stand-by consumption: ≤500mW
• Output voltage: DC 9V
• Output voltage precision:±1%
• Rated current: 2.3A
• Rated power: 20W
• Ripple & Noise(rated input voltage,20MHz bandwidth): ≤50mV
• Linear adjustment rate(full-load): ±1%
• Load adjustment rate(10-100% load): ±3%
• Boot time (full-load): 300ms, 30ms/115VAC; 200ms30ms/230VAC
• Hold time (full-load):16ms/115VAC, 50ms/230VAC
• Working temperature: -30~70°c
• Working humidity (RH):20~90%, no condensation
• Temperature drift coefficient: ±0.02%/°c
• Storage temperature and humidity:-40~+85°c, 10~95%RH
• Switch frequency: 20~65 KHz
• Boot delay time (Vin: 230VAC):200ms
• Disconnect hold time (Vin: 230VAC): 20ms
• Protective functions (rated input voltage): over-load protection, short-circuit protection, over-current protection.
• Applied to Power adapter, industrial equipment, power microcontroller and LED lights

Characteristics:

• Easy to install, pre-installed sockets are on the motherboard, connect the socket to use.
• There are fixed installing holes on the four corners, to prevent movement or vibration from disconnecting, the diameter of the fixed hold is 3.2mm.
• Globally input voltage: 85~264VAC or 110~370VDC.
• High efficiency, high power density, low output Ripple & Noise.
• Isolate input and output
• Short-circuit protection, over-current protection, temperature protection.
• Built-in LCπ type filter, no extend filter circuit.
• Can add high precision adjustable(3296)
• CE certification.
• A two-year warranty

Package includes: